Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2019 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Another Brake Junction Box Leak 900 1994

posted by  jd620 on  Wed Aug 28 18:23 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 07:42 CST 2014
[RELATED]

I have had 3 of these Brake Junction Box Leaks leak over the past 15 or so years and my parts cars (2 940s and 1 740) are getting picked over. The 740 had a different ABS and Brake Junction box. I replaced one today and it leaks also. It looks like the top large nut is pressed in and the high pressure and corrosion is more than the main body and large nut can hold. The body and large nut are magnetic, I would guess cast and steel. I wonder if I could clean the junction up and braze the two together without burning out the threads and if there would be any internal damage? I assume there is nothing inside that the heat would hurt.
Here is a picture I submitted back in 2012 of the part (pretty sure it was me):
https://www.brickboard.com/GALLERY/images/10699.jpg

Does anyone have the part number for the Junction box (Spook?)?

Thanks
--
Mine:3-940s running, 1-740, 2-940 parts, dtrs:4-940s running






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Another Brake Junction Box Leak [900][1994]
posted by  jd620  on Wed Aug 28 18:23 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.