Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2023 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fitting a 93-follow condenser 900

posted by  Orange850T on  Fri Oct 29 09:48 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Subject line is a spoiler. The original R-134a retrofit condenser is NLA so I am fitting the later model in my 1992 960. The issue is the hoses are threaded o-ring fittings and need to be changed over to the straight o-ring manifold with retainer plate. So here is the question:

Does anybody know the o-ring fitting size or have a retainer plate? I cannot find the plate anywhere. Trying to save myself some time buying a bunch of fittings only to return most of them.

Thx
--
1992 965 Black






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fitting a 93-follow condenser [900]
posted by  Orange850T  on Fri Oct 29 09:48 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.