Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2024 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

sealing the windshield gasket 120-130 1967

posted by  riverbend on  Sun Dec 26 07:45 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

Never done this before. Any strategies or tips on getting a reliable, water tight seal around the windshield would be most appreciated.

Same part, two questions -

Seems that the easiest way to get a good seal would be to glue the rubber gasket to the glass before installing the windshield. Does that work or does the glass usually need to be shifted around in the seal to get it installed ?

Does the sealant go between the gasket and the bodywork from the outside ?

Thanks
Greg





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New sealing the windshield gasket [120-130][1967]
posted by  riverbend subscriber  on Sun Dec 26 07:45 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.