Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2000 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacement bushing at shifter housing - AT 200 1992

posted by  JPistos on  Thu Jul 21 11:54 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 10:41 CST 2014
[RELATED]

I'm replacing the bushing where the shifter linkage goes through the side of the shifter housing that bolts into the tranny hump. Don't see anything listed at my usual go-to's parts places like FCP and IPD. Any ideas for a close enough fit, or is that part available somewhere else? Thank you in advance BBers!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Replacement bushing at shifter housing - AT 200 1992

    uid 27's pic
    posted by  Art Benstein on  Fri Jul 22 05:52 CST 2022
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 17 20:10 CST 2014
    [RELATED]

    Sorry, you must have figured I didn't read carefully.

    A few years ago I tried to demystify the auto trans shifter linkage, especially the 91 and 92 version with the first gen shift lock. I put this drawing to match the part callouts in the fiche, but obviously made some error assigning the washer labeled 33. #33 is clearly called a sealing ring as planetman found for you. Since I didn't include a picture of the shifter box from the side where the shaft exits, I presumed you were looking for the bushings I'm always replacing.





    Thanks to Eric!

    --
    Art Benstein near Baltimore

    “Let him who would move the world first move himself.” -Socrates








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Replacement bushing at shifter housing - AT 200 1992

      posted by  JPistos on  Fri Jul 22 08:18 CST 2022
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Wed Oct 8 10:41 CST 2014
      [RELATED]

      Bingo Art and Planetman, you guys are awesome, thank you! Found and ordered 2 through Tasca, with shipping came to about $17 (most of that was shipping).
      Also thank you for the awesome parts photo and diagram. I also have one of those BFH's, but using it (gently) on 30 year old shifter knob removal is not something I enjoy doing, LOL.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Replacement bushing at shifter housing - AT 200 1992

    posted by  planetman on  Thu Jul 21 12:39 CST 2022
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 09:29 CST 2014
    [RELATED]

    Assuming you're working on an automatic, the bushings are still available, but since they're not fast selling parts, I'm not surprised they aren't available from FCP and IPD.

    The bushings cost $6.25 each.

    FYI, there is a seal on the side of the shifter box for the shaft which also still available for $3.13.
    --
    Eric
    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
    Torrance, CA 90502
    hiperformanceautoservice.com or oldvolvosonly.com








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Replacement bushing at shifter housing - AT 200 1992

      posted by  JPistos on  Thu Jul 21 14:58 CST 2022
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Wed Oct 8 10:41 CST 2014
      [RELATED]

      Clarification: It's the seal on the side of the shifter box for the shaft. I searched both IPD and FCP the other day but only found a transmission seal and the AT shift linkage bushing noted below in Art's post.








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Replacement bushing at shifter housing - AT 200 1992

        posted by  planetman on  Thu Jul 21 15:28 CST 2022
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Fri Oct 24 09:29 CST 2014
        [RELATED]

        Special order the seal from Volvo, part# 947543.

        FYI, 381704 is a shift linkage bushing, the bushings for the pivot at the bottom of the shifter assembly are different and are still available.
        --
        Eric
        Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
        Torrance, CA 90502
        hiperformanceautoservice.com or oldvolvosonly.com








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Replacement bushing at shifter housing - AT 200 1992

    uid 27's pic
    posted by  Art Benstein on  Thu Jul 21 12:20 CST 2022
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 17 20:10 CST 2014
    [RELATED]

    FCP has an offering, however the price seems really inflated: https://www.fcpeuro.com/products/volvo-shift-linkage-bushing-automatic-trans-381704

    Is this the bushing you are looking for?

    Oh, that's because Genuine volvo.


    --
    Art Benstein near Baltimore

    “Know thyself.” -Socrates







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.