Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to mount Front bumper License plate *bracket* 700 1990

posted by  Will740turbo on  Thu Aug 4 01:10 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 16:09 CST 2014
[RELATED]

I've got a 1990 volvo again... road worthy, finally!

Somehow, both of these that I've owned have lost their front license plates by losing the entire mounting bracket before I ever had a chance to look at them.

As far as I can tell, there is supposed to be a carriage bolt holding the bracket to the plastic bumper cover. I don't really want to take the entire bumper cover off just to put the carriage bolts in, especially because the clearance to the aluminum bumper is very small.

I'm thinking that there is probably a square plastic expanding plug that will work instead. I'm not entirely sure what those are called, but the hole is about 9/32 square. Does anyone know what the front license plate bracket is supposed to be mounted with or have a modern substitute?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to mount Front bumper License plate *bracket* [700][1990]
posted by  Will740turbo subscriber  on Thu Aug 4 01:10 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.