Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2021

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil pump drive question

posted by  rstarkie on  Mon May 15 14:36 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

I think I remember that the b230f oil pump in the 240's is driven with a slot setup on the end of the distributor shaft. The distributor being driven by a gear on the intermediate shaft.

The b230f in the 7/9 series has the distributor driven by the cam. What is the setup in the 7/9 cars for driving the oil pump?

When putting a b230ft into a 240 car there isn't room for the cam mounted distributor so an intermediate shaft and distributor from a 240 has to be installed. Once that is done does it interfere with the original oil pump setup on the b230ft?

I had always thought I would get around to installing a b230ft in a 240 and actually gathered some of the parts to do that. However, life got in the way and I am no longer looking for a project like that. I just recently wondered how the oil pump drives differed on those two engines.

--
Any twenty minute job is just a broken bolt away from a three day ordeal






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Oil pump drive question
posted by  rstarkie subscriber  on Mon May 15 14:36 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.