Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2021 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

CROSSMEMBER BOLTS 120-130 1968

posted by  voice122 on  Mon Nov 27 02:42 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 00:08 CST 2014
[RELATED]

Hello

Can anyone advise the bolt size that attach the crossmember to the chassis

I am concerned with the single bolts at the front of the crossmember I feel that they are 1/2"

Pipe thread ?

Looking forward to your response

Regards David








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    CROSSMEMBER BOLTS 120-130 1968

    posted by  planetman on  Mon Nov 27 10:44 CST 2023
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 09:29 CST 2014
    [RELATED]

    The bolts are 1/2" x 13 TPI and IIRC about 1-1 1/2" long.
    --
    Eric
    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
    Torrance, CA 90502
    hiperformanceautoservice.com or oldvolvosonly.com







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.