Hi John,

Well it just so happens I have that rear muffler in the back of my wagon that is headed North from my southern house
I was going to take it to WINSLOW Ca. to the JY or pick-n-pull there. They seem to have more 240s there than in Richmond Ca.
They like instant automotive scrap metal to sell to their contacts.

I going through S.F today in about 5hours plus depending on some traffic variables of course. 😬
I see an address in your profile that’s south of where I cross the golden gate.
I go up the 280 to highway ONE and not through downtown S.F. on the 101. It stays congested not that 19th isn’t.
I would have to back track only a few miles as MAPS shows me and you are in a complex of some sort.
Do you have shop or a home style garage to do what ever you are planning?
S.F. Is very urban is why I’m asking.

I can drop it off if you have a way to cut it open.
How are you going to do that in a JY with only battery operated tools allowed.
I have never cut one of these open. I think I would want a die grinder with an abrasive cut off wheel to slice it.

With that said … and Luck be having it, I have another one up farther north in my shop, that I need to dispose. I could cut it open before scraping it locally there.

So how badly do want to see inside?

Do You want photos or a hands on experience with dimensions?
Sometimes a reference scale laid in a photo can work.
If I have time during my house maintenance visit I can try to do that the other one.
My place locally up there doesn’t really like automotive parts but cutting it up helps disguise it some what.🥴
Haven’t figured out a way to do struts so on my way back south I try the JY but sometimes they close before I can get there. I live six hours north of that JY I mentioned.


So what you say, are you interested?

Phil