Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2022 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Ignition switch problem - won't turn most of the time. 444-544

posted by  james_a_sousa on  Mon Sep 16 18:48 CST 2024
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:51 CST 2014
[RELATED]

The ignition key in my '64 544 does not turn most of the time, I have to fiddle with it ... a LOT!

Is it the switch, the cable to the ignition coil, or the coil itself








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Ignition switch problem - won't turn most of the time. 444-544

    posted by  Dave Stevens on  Sun Sep 22 17:32 CST 2024
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Sun Jan 1 02:36 CST 2012
    [RELATED]

    For a worn key, is it steel or brass? A brass key may be well worn by now.

    Does pulling it out a hair while turning allow it to work better? Does lifting it while turning make it work better?

    I recall yours uses a separate ignition key, but if not then any trouble using it in the other locks? Do you have a spare key? Does it work any better? Compare the keys for wear with the backs flat to a surface.

    Do you have more than 2 or 3 keys on the key ring, garage door opener, metal fob, church key, etc.? A heavy key chain hastens wear of both the key and the keyway (as I learned the hard way).
    --
    Dave -still with 940's, prev 740/240/140/120 You'd think I'd have learned by now








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Ignition switch problem - won't turn most of the time. 444-544

    posted by  james_a_sousa on  Fri Sep 20 19:49 CST 2024
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Thu Oct 23 18:51 CST 2014
    [RELATED]

    Guys - Thanks for the input.

    DOH - If I have luck jiggling the key, I guess that the switch is a good place to start.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Ignition switch problem - won't turn most of the time. 444-544

      posted by  planetman on  Sun Sep 22 09:20 CST 2024
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Oct 24 09:29 CST 2014
      [RELATED]

      Assuming you have the stock ignition switch assembly, if you have to jiggle the key to get it to turn, the problem lies with the key or the tumbler assembly and not the switch.

      As I said before, the ignition key tumbler assembly is replaceable.
      --
      Eric
      Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
      Torrance, CA 90502
      hiperformanceautoservice.com or oldvolvosonly.com








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Ignition switch problem - won't turn most of the time. 444-544

    posted by  B.B. on  Mon Sep 16 19:02 CST 2024
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Oct 6 13:15 CST 2014
    [RELATED]

    Hi James,

    Someone had a post recently with an 1800 with the key tumbler not turning
    Maybe a tumbler pin hanging up and he had to file something.
    See Here:
    https://www.brickboard.com/RWD/volvo/1690708/1800/ignitions_switch_woes.html

    Have you tried lubing the tumbler with graphite?
    Worn key? Try another key.

    If the key turns and nothing happens, then you worry about the switch section.

    Cheers from Swampscott, Bill








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Ignition switch problem - won't turn most of the time. 444-544

      posted by  planetman on  Wed Sep 18 12:43 CST 2024
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Oct 24 09:29 CST 2014
      [RELATED]

      That post is for a locking steering column so it doesn't totally apply to the OP's problem.

      The problem most likely is a worn key or worn tumbler assembly issue.

      Your advice to use some graphite in the tumbler or another key is a good idea.

      The tumbler assemblies are replaceable and are available new, but I've experienced some problems with the newer ones.

      The most recent problem was the pin that holds the tumbler in the switch assembly fell out and made the new tumbler useless.

      --
      Eric
      Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
      Torrance, CA 90502
      hiperformanceautoservice.com or oldvolvosonly.com








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Ignition switch problem - won't turn most of the time. 444-544

        posted by  B.B. on  Wed Sep 18 15:10 CST 2024
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Mon Oct 6 13:15 CST 2014
        [RELATED]

        Hi Eric,

        Plan B, if all else fails would be to find a good local locksmith
        that might find it an easy job.

        Best regards, Bill







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.