Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

timing gears/thrust plate 140-160 71

does anyone have the part number for napa metal or alloy cam timing gear or timing set w/metal gear? my local napa says not available but they have told me that about other volvo parts which i have found part numbers on through other means , then ordered with no problem. also has anyone tried the metal thrust plate that comes eith some sets and if so does it wear as good as original brass? one more thing , who sells camshafts & lifters for the 164 (b30) ?

thanks tim s

16 volvos and always looking for more!

e-mail volvob30a@aol.com









  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: timing gears/thrust plate 140-160 71

If you order 271944 from your Volvo agent you will get the re-designed metal timing gear kit. two gears, thrust plate (brass), oil seal and gaskets for both B20 and B300 apps.

Regards








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: timing gears/thrust plate 140-160 71

I got my last B30 cams and lifters and pushrods from IPD. I think I

had to send them an old cam in the process. Strongly recommend

the IPD pushrod and lifter kit.

I haven't seen much difference in the brass spacer plates.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.