Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2015

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PCV system, B280F

does anybody know exactly where the orifice nipple is on the V6 and how to clean it. is it easy for a DIY? thanks for any help

LC








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: PCV system, B280F 700 87

    I'm not sure what a DIY is but maybe this will help. Find the Oil trap, coming out of that is a smaler hose taking the crankcase fumes to the Intake Manifold. This connect's with the Distributor pipe which goes on either side of the Intake Manifold. The Nipple w/orifice is on the side where the hose from the Oil trap is coming in. (unless there are 2 Nipples, which wouldn't be a bad thing!) j/k. This comes from the Chilton's Manual.

    John U.

    '87 780 V6 124K








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      DIY is Do It Yourself.........................nmi 700 87

      No

      Message

      Inside

      Bob

      :>)









    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Re: PCV system, B280F 700 87

      Oh, and to clean it just pull it out spray it down with PVC/Carb cleaner. It's like $2 in any auto store. It will clean ALOT of stuff in/on the engine.

      John U.

      '87 780 V6 124K







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.