Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Should I grab 740 T Head? 200 1982

There is a 740 Turbo in the Kar Bashers yard; should I grab the head, manifold, and the worn Turbo it for my 1983 B21FT?








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Should I grab 740 T Head? 200 1982

Go to the link below to learn more about the different heads abailable to b21/23/230 motors.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Should I grab 740 T Head? 200 1982

If it is a 405 or 530/31 casting, it is an improvement for sure. And interchangeable for any B21/B23/B230 F or FT. But, it will not have the K-jet fuel injector holes drilled and tapped. That would be good for a B230 intake conversion if you plan to do that. You will get the small coolant passages (SCP) that is better for hanging on to the head gasket. If you can get it for $50-100, it is a good thing to have.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Never turn down head. 200 1982

.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

LOL [nt] 700 1989

nt







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.