Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2012 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

HELP!!! I killed my wiper motor??!!!!! 200 1984

So,

I followed the instructions from the wiper motor thread & "dave's" web site, BUT I couldn't get the screws on the motor undone to get inside (I wnat to fix the magnet). So, I needed to go get another screwdriver that I thought was in the '77 (my girlfriends), and I put it all back together.

Not too much problem, but when I tried the wipers, they moved 1/4", then the arm came loose and the motor kept working but the wipers wern't. Okay, I stuffed up, but not too badly.

I got home (still minus that screwdriver!), and pulled the motor out again, so that I could re-align it & get the cog lined up porperly etc.

Pulled the cover off the cog. (Still can't get those scews undone to the motor though AAAHHH!). Decided to get the motor to re-centre itself, so plugged the motor in, and turned my windscreen wipers on - nothing (yes, i did turn the key). Checked the plug - its okay - checked the contacts - they seem okay. I'm guessing the motor is centred at the moment, but am not sure. The cog is positioned so the slopey bit it is pushing the contact arm up and touching the top contact arm. I've checked all the fuses. I've power to everything else. It doesn't work with the cover on or off.

PLEASE HELP!

John









  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: HELP!!! I killed my wiper motor??!!!!! 200 1984

John,

The body of the wiper motor has to be earthed for it to run (no earth through the plug). You'll see a brass coloured strip under one of the mounting legs. That's how the unit is earthed when its attached to the car. It and the piece of bodywork it touches have to be clean and shiny for a good connection. I also got a 25% improvement in wiper speed by running a seperate earth wire from one of the gearbox cover screws to a convenient chassis earth.

If you need a new unit, I've got stacks of them. 10 bucks and one's yours.

Cheers








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fixed. Re: HELP!!! I killed my wiper motor??!!!!! 200 1984

Cheers Steve.

The earth worked. Ran a lead to the chassis. Its only temporary 'cause I've got to fix that noisy motor. I'll run a better earth when I fix it (not this weekend - I've got an indicator wire to fix in the tail!).

So long as the units you've got aren't worm out, I'll grab one. Save me a bit of stuffing around, or at least allow me to keep the car going while I look at the other one.

Thanks

John








<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.