Put 960 up on rack and ran in gear noticed inside of both rear alloy wheels are bent and tires are out of round during ratation.Also noticed cv joint shafts move in and out from wheel towards rear end and then back again.Question can alloy wheels be straightened and do I have a problem with cv joint shafts mileage is 140000 just bought car.Thank-you

My understanding is alloy wheels can be straightened for roughly $60-$75, but the process is involved although worthwhile. The tire is removed and the wheel is sent to the company. The wheel is trued while heated by special equipment manufactured specifically for this purpose. The wheel is repainted and returned to you. Turnaround is very fast. I have been meaning to do this for quite some time with two of mine. I am interested whether others have tried this before I proceed. I can't advise you on the CV's. My car is a 944, without IRS, and has no CV's. Good luck.