Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

weather stripping 200 87

posted by  someone claiming to be pomp on  Mon Sep 14 09:52 CST 1998 [RELATED]

the weather stripping around the doors on my 240 wagon has been coming un-done. what's the best method/product for putting it back in place for good?







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: weather stripping 200 87

posted by  someone claiming to be Randy on  Mon Sep 14 11:43 CST 1998 [RELATED]

>the weather stripping around the doors on my 240 wagon has been >coming un-done. what's the best method/product for putting it back in >place for good?

Pomp,

The weather stripping around the doors of the 240 is not held on with an adhesive- it fits in a channel. Notice the back side of the weather stripping fits into the channel on the door. Sometimes it helps to spray some Nu Vinyl , ArmorAll, etc. on the rubber to make it slip in a little easier as well as an occasional nudge with a DULL putty knife, but it just consisits of getting one edge seatted and then pushing the second edge in until it seats- work your way towards the end (at the bottom of the door)






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.