Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Looking for special tool? 700 1985

posted by  someone claiming to be Bob Hanbury on  Sat Jul 28 03:26 CST 2001 [RELATED]

Look for a special tool to steady distributor base in order to knock pin out of distributor shaft. Hard to com out-don't want to bend shaft.

Thanks,

BH







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Looking for special tool? 700 1985

posted by  someone claiming to be Steve Ringlee on  Sat Jul 28 04:32 CST 2001 [RELATED]

The tool may be used with a vise or hammer to remove the shaft

pin holding the distributor together. You will need it should you ever decide to change the inner o-ring seal on this shaft. You can purchase

it from:

John Vilas

Vilas Motor Works

901 S. Texas Avenue

Bryan, TX 77803-4554 Cost is $25 (at 6/6/00)






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.