Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2021 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

fuel injection 140-160 1969

posted by  someone claiming to be Karnan on  Tue Jul 31 02:49 CST 2001 [RELATED]

I have put a 1974 144 fuel injected motor into my 1969 144. I do have a

workshop manual but it shows a volvo setup. The injection system on my motor is a bosch fuel injection system. There does not appear to be any

control box or connection to the distributer. If there is a control box

where is it located on the 1974 144 wagons?







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: fuel injection 140-160 1969

    posted by  someone claiming to be Jeremy Whorton on  Fri Aug 3 06:14 CST 2001 [RELATED]

    I have a 142e 1971 and my control box is supposed to be under the seat, on top of the spring 'webbing'. It's a D-jet.

    I cannot confirm this because I purchased the car without engine or tranny. The previous owner removed the D-jet and put a Weber.

    I plan to return it to D-jet if I can locate the rest of the parts needed.

    I am still looking for an engine/tranny combo in the south if somebody has one.

    Hope it helps,

    Whorton







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: fuel injection 140-160 1969

    posted by  someone claiming to be George Downs on  Tue Jul 31 08:02 CST 2001 [RELATED]

    The green Volvo manual for 1974 144 or 1975 244 will show this

    engine and fuel injection setup. The Haynes manual for early 240s

    also shows it. (the one for later 240s does NOT show it, since they

    did not use the same engine. It HAS to show the 1975 240 to include

    your engine.)

    I'll be interested to know how you do as I have bought a FI system like

    that that I hope to install in either a 122 or a 145.







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: fuel injection 140-160 1969

    posted by  someone claiming to be Jim McDonald on  Tue Jul 31 03:09 CST 2001 [RELATED]

    You have a Bosch K-Jetronic F.I. system; there's no control box. It's mechanical, rather than electronc.

    Earlier cars used a Bosch D-Jetronic system which is electronic, and has a control box and points in the distributor.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.