Volvo RWD ALL Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2020 ALL INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Do any Volvos have an 11 mm hex nuts anywhere? ALL All

posted by  someone claiming to be Robert on  Mon Aug 20 09:14 CST 2001 [RELATED]

especially the 240, 740, or 960 models?

Thank you,

Robert







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Do any Volvos have an 11 mm hex nuts anywhere? ALL All

posted by  someone claiming to be terry haywood on  Tue Aug 21 03:26 CST 2001 [RELATED]



240 - the brass fitting on the intake manifold that connects to the hose from the flame trap.







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Do any Volvos have an 11 mm hex nuts anywhere? ALL All

posted by  someone claiming to be John Sargent on  Mon Aug 20 13:08 CST 2001 [RELATED]

The overdrive on the M46/OD transmission is retained by eight 11 mm nuts which fit the studs extending from the transmission case.







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Do any Volvos have an 11 mm hex nuts anywhere? 120-130 1966

posted by  someone claiming to be George Downs on  Mon Aug 20 11:54 CST 2001 [RELATED]

Now the REAL Volvos (122, 140, 164) and associated engines

(B18, B20 and B30) have LOTS of 1/4"-20 UNC and a few 1/4"-28 UNF

bolts which have a 7/16" hex (0.4375"). 11 mm is 0.433" and 11 mm

wrenches (especially if they are a little worn) work very well on

them.







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Do any Volvos have an 11 mm hex nuts anywhere? ALL All

posted by  someone claiming to be philip bradley on  Mon Aug 20 09:43 CST 2001 [RELATED]

89 740T with ABS, front caliper bleed screws. All I can think of presently. 11mm is not that common on these Volvos; you would probably find them on a component made by another manufacturer of parts used on these Volvos.

Philip Bradley







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Do any Volvos have an 11 mm hex nuts anywhere? ALL All

posted by  someone claiming to be Art Benstein on  Mon Aug 20 11:28 CST 2001 [RELATED]

So far, on 240s, the only 11mm tool I can recall using is a line wrench. The brake fittings.





Art Benstein near Baltimore






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.