Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

CAT test port plug 200 90

posted by  someone claiming to be Bruce on  Wed Oct 10 06:44 CST 2001 [RELATED]

I am installing a new CAT. Does the test port hole get torqued? With or without antiseize?

Thanks, Bruce







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: CAT test port plug 200 90

posted by  someone claiming to be Zee on  Thu Oct 11 00:40 CST 2001 [RELATED]

is there a known reason you need to have the exhaust tested at that port?

I installed a new exhaust system.....and that plug promply fell out!

Luckily, i found it....and GLUED it in with a muffler sealant product.

I would never anti-sieze that bugger.







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: CAT test port plug 200 90

posted by  someone claiming to be bob on  Wed Oct 10 16:57 CST 2001 [RELATED]

Use anti sieze for possible removal at later date. No specific torque, just needs to be tight enough not to vibrate loose.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.