Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Blows hot when set for cool......after thermostat replaced. Help Please. 200 1985

posted by  Hibbo on  Thu Jan 10 21:13 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jan 30 18:28 CST 2013
[RELATED]

Replaced the non functioning thermostat today with a used stainless steel one from the wrecking yard. Also gave the engine a good flush before renewing the coolant. Temp guage now sits at parallel. However an unwanted side effect is the blower blows hot irrespective of setting. It does get hotter when set for heat.

This is a BIG downer in an Aussie summer!

Thoughts and advice will be appreciated.

Thanks.
John H from DOWNUNDER






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Blows hot when set for cool......after thermostat replaced. Help Please. [200][1985]
posted by  Hibbo  on Thu Jan 10 21:13 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.