Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2002 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

97 760 front bearing replacement 700 1987

I am replacing the front wheel bearing on my 87 760 (without ABS?,
it has two brake lines to the girling calipers)
Do anyone know what size the caliper mounting bracket allen bolts are and
where are new allen bolts sold. Are there socket allen wenches,in order
to properly torque the bolts?
The front left side makes a humming/grinding sound, and I checked the front
outer bearing.
I have a 1987 760 wagon with 155,000 miles.
Thanks
phil








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    97 760 front bearing replacement 700 1987

    The humming is caused by the pads acting on the rotors. The glide pin lubrication is gone and the assembly is sticking. Make sure the rubber boots are not damaged and there is plenty of lubrication. R&R as necessary.
    --
    Warren Bain - '86 744Ti M46 >285Kmi, '96 965 >99Kmi Wifemobile near Manassas Va.. I get e-mail replies to my postings.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    97 760 front bearing replacement 700 1987

    The socket head Allen bolts are 10mm internal hex. I use a 10mm bit on a 1/2" drive socket set. An Allen wrench will work, but you will want a piece of pipe for a cheater handle.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.