Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Sticky Lock 200 1981

The door lock on the driver side of my 240 is quite sticky...it's gotten progressively tougher to turn, and there's a grinding noise sometimes when unlocking. Any suggestions for freeing it up?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Sticky Lock 200 1981

one thing i do with my locks is to spray inside them with WD40. I was even told by a professional locksmith that this was a good idea. The few lock that was sticky cleaned right up with the WD40....maybe give it a try.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Sticky Lock 200 1981

Try using some graphite in the lock. If that doesn't work you may have to take the door panel off and look and the entire mechanism. Graphite can ususally do wonders to sticking locks. Good Luck.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.