Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

injector plugged? 200 1983

posted by  Breadman on  Sun Mar 17 11:58 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 18 04:46 CST 2012
[RELATED]


I put in a can of BG44k and a tank of 93 octane, next day runs rough,seems #3 cylinder is not firing. The book says the injectors cannot be cleaned and must be replaced. How do I get them out? Do they clip to the fuel rail? Plugs looked good, fairly new fuel filter,plugs,wires,coil. Also sometimes the tach gets stuck for a bit,then works fine-- is the ecu going bad?







  REPLY TO THIS MESSAGE    PRINT   SAVE 

injector plugged? 200 1983

posted by  Joe HC on  Sun Mar 17 13:41 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jun 21 08:19 CST 2008
[RELATED]

What kind of injectors do you have?

--Joe
--
1977 244, B21F engine, 140K, "carlsbad yellow", IPD anti-sway bars, Minneapolis, MN







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.