Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 6/2001 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

sway bars... 200

this is a VERY elementary question.......i am replacing the sway bars from my 244 ith those from a turbo. will i need to have the car aligned after i replace the front bar???? i'm drawing a total blank.........

clueless (Bubba)
--
just call me Bubba








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

sway bars... 200

but you may need the newer style bar-to-frame brackets and bushings. If your bushings are shot, and you buy new ones, these likely will have two "bumps" formed in the lower end, replacing the metal tabs used in the original buchings.

different brackets needed for 'em.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

sway bars... 200

No, the sway bars do not affect alignment. It's all good. Later








  REPLY TO THIS MESSAGE    PRINT   SAVE 

sway bars... 200

nope.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.