Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2011

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Regina Fuel Pump Replacment, 2nd Try


Looks like my previous query slipped under the radar, so I'll try again. I'm replacing the Regina/AC fuel pump in a '90 740 wagon. Have the old unit w/sender out of the tank; the new pump comes UPS today. While I see
the contacts must be unsoldered, it's not clear just how the pump detaches from the brackets and adjacent fittings, esp. the rubber square above, and what
looks like a tiny master cyl. reservoir with double-domed cap, which may be some sort of pressure accumulator. Don't want to force anything and break it.
All the info I've found on searching the board speaks to removing and replacing the whole unit, not disassembling the pump from the sender. Anybody know?
Thanks!








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Regina Fuel Pump Replacment, 2nd Try

George,

I replaced the pump on my RexRegina equipped '90 740 GL. That car is long gone and I'm sorry I can't remember the procedure but I do remember it was not very involved. I removed the old pump and put the new one in place. I don't remember doing any soldering. I wish I could provide more information but I remember it wasn't a big event.

Randy







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.