Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 1800 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

timing 1800

what is the correct timing for my '72, '73ES, what is retard, what is advance. what does it mean to increase on the side of the scale that has 0, 10, 20, 30 divisions, advance or retard the timing.



Thanks for your help








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    timing 1800

    That is 30° advanced.

    If it were mine I would leave the vacuum connected and
    adjust it to where it idles at about 7-900 rpm and is
    advanced about 20 - 24°. Instructions tell you to set it
    at about 10° with vacuum disconnected but that affects the
    idle speed a lot and makes the final adjustment problematic.
    It's easier to set it once with the vacuum still connected.
    Then rev it up some and see if it goes up into the upper 30s.
    (it should go that high or maybe more.)

    If it is not advanced far enough the engine and especially the
    exhaust will run hot and power will be reduced.
    --
    George Downs Bartlesville, Oklahoma








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      timing 1800

      Thank you,

      You are right, with the vacuum disconnected is problematic







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.