Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

I need a control arm bushing tool! i was told Duane Hoberg maybe? 200 1986

posted by  unggthat on  Sat May 4 16:50 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 6 10:37 CST 2014
[RELATED]

Sorry Duane to single you out(if you read this) but i was told you rent the tool and could maybe ask you. However, if anyone else reads this and will rent one to me, that would be just wonderful. I have enough other stuff to do as it is, and I couldn't even find the parts to make the homebrew one at the nearest home improvement store(lowes)....that was a wasted 1.5 hour trip. anyways, I'd really appreciate it if anyone would respond. thanks again!
nate gundy








  REPLY TO THIS MESSAGE    PRINT   SAVE 

I need a control arm bushing tool! i was told Duane Hoberg maybe? 200 1986

posted by  Gboy on  Sun May 5 05:36 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jan 28 00:41 CST 2009
[RELATED]

I made the tool set you need, but I used a regular grade bolt. I couldn't find a grade 8 bolt locally so I used grade 3. Any big city should have good grade of bolts locally. I'm in Waldo-Florida. I'll rent or sell mine - parts wsere about $20. + 1 hour time. Let me know Gary








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

I need a control arm bushing tool! i was told Duane Hoberg maybe? 200 1986

posted by  unggthat on  Sun May 5 05:47 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 6 10:37 CST 2014
[RELATED]

hey, I actually have the bolt and nut, i just need the other parts. I'd totally be willing to buy it or rent if you'd prefer....send me a price to my email if you'd like- ngundy@hotmail.com. thanks a ton!
nate gundy








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

I need a control arm bushing tool! i was told Duane Hoberg maybe? 200 1986

posted by  unggthat on  Sat May 4 16:53 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 6 10:37 CST 2014
[RELATED]

I MEANT TRAILING ARM, NOT CONTROL ARM....THEY'RE ALL ARMS OF ONE KIND OR ANOTHER....anyways, its the trailing arm removal tool that i need. thanks again
nate gundy







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.