Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Electric Fan 200

posted by  aznm on  Wed May 8 19:28 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi, just a quickie to enquire as to what size electric fan would be suitable for a B21E engine in Australian conditions? THanks ,

Aaron








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Electric Fan 200

posted by  aznm on  Thu May 9 16:36 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Is it possible/necessary to leave the existing plastic fan shroud on?








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Electric Fan 200

posted by  Rludwick on  Wed May 8 20:13 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 31 16:10 CST 2013
[RELATED]

Size is not quite as important as how many cubic feet per minuit of air flow( or whatever the metric equivilant is)
Get the fan with the highest CFM rating that will fit() I think I have 12" fans on both of mine , one is a medium flow and the other is pretty wimpy and needs a stouter one.climate here not as hot, but probably alot more humid








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Electric Fan 200 1981

posted by  someone claiming to be budweiser_man on  Thu May 9 08:06 CST 2002 [RELATED]

I just put a electtric fan on my 81 245, and it jumped my horse power up alot more torque, better RPM jump. www.turbobricks.org is a good place to look at they tell you how and what fan to use.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Electric Fan 200 1981

posted by  someone claiming to be John on  Thu May 9 08:55 CST 2002 [RELATED]

Has anyone tried swapping the factory electric fan set-up from a 940 into a 240? It looks like it would bolt right in - and be CFM correct.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.