Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2007 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

bendix caliper removal 700

Hi all,

I am trying to change the rotors and pads on my 740 gl. I have the car jacked up and the front wheels off. I have bendix front calipers. I have removed the lower guide pin, but can't figure out how to get the top guide pin out. any other hints for replacing rotors would be helpful, but most importantly I need to know how to get that upper guide pin out. Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

bendix caliper removal 700

From memory you don't need to remove top pins, just rotate entire caliper upward, using that pin as pivot point. at a certain point push inwards toward car and caliper will slide off.

jc








  REPLY TO THIS MESSAGE    PRINT   SAVE 

bendix caliper removal 700

Thanks that was it I thought for some reason that I had to remove the top pin.

Thanks again.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.