Can anyone explain how to attach the headliner panel to the upper sunroof? There are two springs and two clips. This would seem easy enough to puzzle out. However there is no obvious attachment point for the springs and the metal clips appear to be able to attach in three different ways. So, where do the coil springs attach and do the metal clips hook on the straight edge, center, or the "U" shaped edge. Anyone who has dissassembled the sunroof should know what I am discussing despite my poor ability to elucidate. I have exhaustively searched the 700/900 FAQ and no one addresses this in any detail. Please help, this is the last step in overhauling the sunroof!

Ben, once you get this figured out can you write it up and send it to me for the FAQ? sringlee@hotmail.com

Never mind, Laurel MS.
--
Warren Bain - '86 744Ti M46 >290Kmi, '99 V70Glt > 45K mi, '96 965 >100Kmi Wifemobile near Manassas Va.. Check the 700/900 FAQ via the 'features' pull down menu.

The U shaped clips attach on the trailing edge of the sunroof on the back side. Open the sunroof in the vent position, the trailing edge is up, and you can feel four holes on the lower edge. The clips get inserted there. Use a pair of needle nose pliars. If you wish, I can e-mail you a pic.

Is that Laurel Md, (Wash. DC)?
--
Warren Bain - '86 744Ti M46 >290Kmi, '99 V70Glt > 45K mi, '96 965 >100Kmi Wifemobile near Manassas Va.. Check the 700/900 FAQ via the 'features' pull down menu.