Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2011 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Accessory poly bushings 200 1987

Are the bushings for the accessories slip in or press in ,and are there any tricks for this job. 150k service coming up and figure why not. Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Accessory poly bushings 200 1987

Lube 'em up with a soapy water solution or put some ArmorAll on 'em. Makes it a lot easier to slip in.
RP
--
RP '87 245 (Ol' Blue)276,000 mi, '93 245 (Ruby)152,000 mi, '02 BMW 325, '98 Mustang Cobra, '87 Harley Heritage....








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Accessory poly bushings 200 1987

The ones on the ac/ps bracket are alot easier to do if you remove the whole bracket, then whack'um out and whack'um in.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Accessory poly bushings 200 1987

a little tight but they fit.....no press needed..
--
http://www.fidalgo.net/~brook4/oilslubesfilters.html







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.