Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Output shaft bushing 700

posted by  someone claiming to be D-Squared on  Mon Jul 29 01:10 CST 2002 [RELATED]

Just replaced output shaft on my 740T with 220K. What is the proper orientation of the bushing oil hole ? The bushing I removed had the hole in the 3:00 o'clock position (looking at output shaft toward front of car) which aligned with what appeared to be an oil gallery in housing, made sense. I put the new one in the same way but I've seen conflicting responses on brickboard.

BTW, I used the bushing removal tool from IPD and the job went very smoothly and took approximately 1:45 minutes including clean up time.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Output shaft bushing [700]
posted by  someone claiming to be D-Squared  on Mon Jul 29 01:10 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.