Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2024 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

740 exhaust 700 1991

I need to replace the exhaust system from the cat back on a 91 740. All the systems I see on line are Starla, which I gather from other posts, is a Walker system in disguise. Nothing against Walker but does anyone have a source for a Volvo system on line? I could go through my local dealer I guess but I try an avoid him unless absolutely necessary as he is outrageous on about everything $$wise. I guess secular humanists would call him just a good businessman but the Bible calls those who steal from others thieves.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    740 exhaust 700 1991

    If you want to get 10 years + from your exhaust system - stick to Volvo's exhaust system. Thicker pipe, multilayered silencers - excellent quality and thats why it lasts -- but the price is hard to swallow. After you've replaced the aftermarket performance brands a few times due to corrossion, the volvo price won't seem so bad after all and its easy to do yourself.

    From experience.

    PS: the stainless steel system seem perfect, but beware that a thin guage cheap stainless system is not the answer.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    740 exhaust 700 1991

    Call Rick at IPS 900 897 7278. Believe that Starla is OEM stuff and I have used it for year with no problems. He may be able to explain it all.

    dick








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    740 exhaust 700 1991

    You can get a cat back OE system from Barton Volvo or Swedish Engineering for around $200

    Or.

    You could upgrade and get IPD 2.5 inch Sport Exhaust for a little less than $300.

    I got IPD 2.5 inch Sport Exhaust three months ago. It a easy DIY job. A little louder than OE but not too much.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    740 exhaust 700 1991

    If you're going to keep the car more than a couple years I'd install a stainless steel catback exhaust.

    Next time I have to mess with my 740T it's going to a 3" turbo-back stainless exhaust with hi-flow cat.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.