Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2023 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

doing timing belt on volvo 1989 volvo 780 turbo 700

posted by  someone claiming to be Leo Jon on  Wed Jul 31 08:47 CST 2002 [RELATED]

If I want to change any of the seals..are there any of the seals that are partiularly easy or difficult to remove and replace...crank verses other seals...thanks..Leo








  REPLY TO THIS MESSAGE    PRINT   SAVE 

doing timing belt on volvo 1989 volvo 780 turbo 700

posted by  boondoggie on  Wed Jul 31 09:21 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 23 00:37 CST 2001
[RELATED]

Do the cam/crank/auxshaft seals while you're in there. They're cheap, and take you an extra 2 minutes each. (Well, cam & aux take a little longer, as you have to take the pulleys off, which you would not otherwise...)

My crank & auxshaft seals crumbled so badly that I could not remove them, and ended up having to remove the carrier plate they ride in as well. (You'll see if you get in there.) so you may wanna pick that gasket up just in case...

-Paul Demeo
1990 780T







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.