Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2020 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

headliner probs!!! 700 1989

posted by  89745GL on  Wed Jul 31 13:31 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 8 17:38 CST 2010
[RELATED]

Hi, it's me again. I got the excess glue off the new headliner material. Now I have a different problem! I am an idiot. I went ahead and cut the sunroof hole out before putting the new headliner back in the car. I did not leave 3/4" beyond the edge (as the IPD instructions suggests). I cut it flush. Now reading all of the instructions before attempting it, must be the first thing you do if you are contemplating to tackle this job! Do as I say, not as I do! Anyone out there have a solution for me? I don't have that excess material to tuck in the trim around the edge of the sunroof? By the way, should I replace that trim piece? Thanks in advance, I hope.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New headliner probs!!! [700][1989]
posted by  89745GL  on Wed Jul 31 13:31 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.