Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Additional odometer gear pictures needed 200 1989

posted by  someone claiming to be Eric S. on  Thu Oct 31 13:50 CST 2002 [RELATED]

Does anyone happen to have additional pictures (besides the ones available on Jeff's website) of the odometer gears from an electric K10042 or K9800 speedometer? I'm looking for a picture of the plastic gear and the tan tooth gear that sits/rests on it.

Thanks,
Eric Staufer
'89 244DL 119k







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Additional odometer gear pictures needed 200 1989

    uid 27's pic
    posted by  Art Benstein on  Thu Oct 31 14:42 CST 2002
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 17 20:10 CST 2014
    [RELATED]

    Eric, I don't know about Jeff's website, but you're welcome to take a gander at my junk collection. 600KB image left this full resolution in case you were gonna count teeth or something. I hope you didn't want to know which ratios these came outta...
    --
    Art Benstein near Baltimore








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Additional odometer gear pictures needed 200 1989

      posted by  someone claiming to be Eric S. on  Thu Oct 31 15:03 CST 2002 [RELATED]

      Art,

      Your picture was *exactly* what I needed to see, thank you! Unfortunately, I couldn't tell by Jeff's photo because the larger plastic gear was resting in place, and I needed to see the gear taken out of the unit.

      Now, I've got a question for either you and/or Jeff. On the back of the larger plastic gear, I can tell by the picture that there is a colored substance that forms a "tooth-type" gear. *IF* that substance hardened up and a "tooth" breaks off, wouldn't that affect the functionality of the odometer?

      If that's the case, that's my known problem and the gear I need to make my odometer function again... as I have a new tooth gear, capacitors and motor from an ill-fated odometer repair by a shop. After 10 months, I was finally able to get my money back from the repair and I still have the gears/parts, but I, firmly, believe that's the source of my problem, after inspecting the unit last time I removed it.

      Regards,
      Eric Staufer,
      '89 244DL 119k







      •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

        Additional odometer gear pictures needed 200 1989

        uid 27's pic
        posted by  Art Benstein on  Thu Oct 31 15:12 CST 2002
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Fri Oct 17 20:10 CST 2014
        [RELATED]

        Not sure what you mean when you refer to a tooth type gear, but it sounds a though you are very much into what you are doing. You wanna see the other sides?
        --
        Art Benstein near Baltimore








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          Additional odometer gear pictures needed 200 1989

          posted by  someone claiming to be Eric S. on  Thu Oct 31 15:15 CST 2002 [RELATED]

          Absolutely! Zap the otherside my way! :-) I'll explain in the next message.

          Many thanks!
          -Eric







          •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

            Additional odometer gear pictures needed 200 1989

            uid 27's pic
            posted by  Art Benstein on  Thu Oct 31 15:57 CST 2002
            Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
            last visit: Fri Oct 17 20:10 CST 2014
            [RELATED]

            OK, I expect this will be a shot of the backsides: another 600KB image
            --
            Art Benstein near Baltimore








            •   REPLY TO THIS MESSAGE    PRINT   SAVE 

              Additional odometer gear pictures needed 200 1989

              posted by  someone claiming to be Eric S. on  Thu Oct 31 16:11 CST 2002 [RELATED]

              Ahh.. perfect. You see on the white plastic gear, that yellow "sun-shaped" substance? A part of the 'tooth' had gummed up and broke off on my speedohead. I'm *assuming* that since it is broken, it'll cause the same problem as if the smaller tooth gear had a missing tooth... the odometer will stop functioning.

              If someone else can verify that, then that's the piece that I will need to fix my broken odometer. If that is my problem, can I send you a few bucks for that gear?

              Thanks again for the pictures!

              Regards,
              Eric Staufer,
              '89 244DL 119k







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Additional odometer gear pictures needed 200 1989

    posted by  hamonbagel on  Thu Oct 31 14:27 CST 2002
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed May 28 02:21 CST 2008
    [RELATED]

    Eric or whomever else,

    If you find additional photos somewhere, I would be more than happy to link them on my site if it would help others. Just let me know. Sorry I can't help you beyond the photos on my site.


    Jeff Caplan
    http://members.ispwest.com/jkcaplan/gearwebpage/gear.html







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.