Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

ID and OD of Stock 940 Turbo Downpipe? 900 1994

Does anyone know offhand what is the id and od of the stock 940 turbo downpipe? thanks for the help.
Michael








  REPLY TO THIS MESSAGE    PRINT   SAVE 

ID and OD of Stock 940 Turbo Downpipe?

It is about a 2.25 inch pipe. That would be OD. It will mate up with a 2.25 inch pipe from the auto parts store, for example, that has one end enlarged for a slip fit on another 2.25 inch pipe. It could be that the real measurement is metric, but I am not sure. Same goes for the rest of the exhaust.

Philip Bradley








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ID and OD of Stock 940 Turbo Downpipe?

Hi Philip. I wonder if you would know if the old B23FT 760T downpipe is larger than the later ones. I had a hard time getting the right sized bell housing exhaust clamp from Volvo.

Rene
--
1988 745 GLE B23FT M46 (J-P Type combo). Toronto. 380000Km. Suspension upgraded and lowered . 1982 242 GLT project (B23ET LPT to be included) Also in charge of GF's 1986 244







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.