Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 Fuel Prepump upgrade 200 1982

posted by  someone claiming to be Greg on  Fri Nov 29 08:38 CST 2002 [RELATED]

Hi All,

Anyone have any experience with upgrading their early 240 model in-tank pump with the higher capacity 700 series pump? There's a note in IPD's catalog how you must shorten your fuel pickup tube by the difference in the pump lengths (~30mm) and "a new pump clamp is required", as well as the note, "a clamp is required to secure the pump to the pickup tube".

My old (shorter) pump has a raised ring around the pump body that keeps it from falling through the OEM plastic pump collar secured to the fuel return line. The new pump is missing this ring, and the pump just slides in and out of the pump collar. Reusing the old clamp will have the prepumpp supported just by the flexible fuel hose and its clamps. Can someone describe the new pump clamp and where one can be found?

Also, does anybody have a copy of the Volvo service bulliten that addresses this upgrade?

Thanks in advance!

Greg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 Fuel Prepump upgrade [200][1982]
posted by  someone claiming to be Greg  on Fri Nov 29 08:38 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.