Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

oil gauge question 200 1983

posted by  Breadman on  Sun Dec 8 12:52 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 18 04:46 CST 2012
[RELATED]

How can I tell if the sender is for a 3 or 5 bar gauge? Also is there a way to test the sender to see if it works? Its got two blade terminals- one is G , and one is WK ....I ASSUME G is for the gauge wire, What would WK be? Idiot light? TIA, Mark
--
'83 244GL 210K








  REPLY TO THIS MESSAGE    PRINT   SAVE 

oil gauge question 200 1983

posted by  mcduck on  Sun Dec 8 13:53 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 9 11:47 CST 2012
[RELATED]

The range of the sender is stamped on one of the flats of the hex.
The only way to test the sender is to hook it up to the guage and apply appropriate voltage and pressure.
WK is, indeed, the idiot light.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.