Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2001 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Speedometer Gear... Not Broken, But Spinning on Shaft 200

I have a 120mph mechanical speedo, it works intermittantly. I have foud that the problem is the large grey gear on the main odomoter shaft is spinning on the shaft. Is there a way to adhere this gear to the shaft? Any other suggestions.

THanks,

Matt

--
'82 DL - 151k, '93 945 - 99k








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Speedometer Gear... Not Broken, But Spinning on Shaft 200

Matt, I was going to repair mine by staking it with a small punch, but I found the shaft was worn thin at the wheel. I simply reversed the shaft; the gear fit well. That was 35K ago now 314K.
--
Art Benstein near Baltimore








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Speedometer Gear... Not Broken, But Spinning on Shaft 200

Loctite 411, the one with the rubber base, so it is flexable and less chance to break.

Matt email me if you need some,
Chuck







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.