Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

What size is the oil plug on a 87' 240DL Wagon 200 1987

What size is the oil plug(to change oil) on a 1987 Vovlo 240 DL Wagon. Any info would be greatly appreciated.
THANKS,
MATT








  REPLY TO THIS MESSAGE    PRINT   SAVE 

What size is the oil plug on a 87' 240DL Wagon 200 1987

If it's the original plug, it's 25mm. 1" will also work.

--
Matt L. -- Cary, NC -- '91 740 wagon








  REPLY TO THIS MESSAGE    PRINT   SAVE 

What size is the oil plug on a 87' 240DL Wagon 200 1983

I have never had to use a socket that big. 17mm is mine, just my $.02

Larry in beautiful Northern New Mexico
(looks alot like southern Colorado)
1983 DL244 w/127k








  REPLY TO THIS MESSAGE    PRINT   SAVE 

What size is the oil plug on a 87' 240DL Wagon 200 1983

Strange, Larry. Both my 81 and 83 have the 25mm hex-head oil pan drain plug. A six-point 1-inch socket (equates to 25.4mm) works perfectly. I got a magnetic drain plug from IPD and it also is 25mm.
Are you referring to the thread size?
--
Bob (81-244GL B21F, 83-244DL B23F)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

What size is the oil plug on a 87' 240DL Wagon 200 1983

1" socket for my 1990 740. since it's the same engine, i'd assume it's the same type of plug.
--
Kenric Tam
1990 Volvo 740 base sedan (B230F)
My Volvo 'Project'







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.