Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2002 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine MOunts on my first Volvo (1987 740 Turbo) 700 1987

Hey All,

I just bought a 1987 740 Turbo Wagon with 360,000 km and a 4 + OD manual transmission. The inside and under the hood are in decent shape but the exterior has some rust.

Of the repairs I have to do, one major one is the engine mounts. These are the hydraulic ones. Are there any decent aftermarket rubber ones I can use instead?

I am also happy to get any suggestions on making the outside as pretty as the inside.

Parn 740 Turbo
Ontario, Canada








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine MOunts on my first Volvo (1987 740 Turbo) 700 1987

Try FCP Groton. Great service. Great prices.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine MOunts on my first Volvo (1987 740 Turbo) 700 1987

In this province, just washing the salt of your car will make a tremendous improvement.
Regarding the mounts, unless you have a cheap source for the "other" style brackets necessary for the rubber mounts, you're probably better off just replacing the hydraulic mounts with the same. They really do make the car luxurious.

Rene Svastal
--
1988 745 GLE B23FT M46 (J-P Type combo). Toronto. 380000Km. Suspension upgraded and lowered . 1982 242 GLT project (B23ET LPT to be included) Also in charge of GF's 1986 244







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.