Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

lowering 200

Hi

Couple of days ago Iīve seen a nice 245 on the road which had a somehow unique appearance. It was lowered but the front end was slightly deeper than the rear end.

My problem is, that I have the nivomat ( rear shocks which could be filled with compressed air to keep the rear axle on a constant horizontal level when heavy load or lots of passengers are transported ) installed on the rear axle and none of the sport shock suppliers offer such a system. So I canīt lower the car completely because then I would lose the nivomat.

Now my question is:
Can I lower only the front end and keep the stock Volvo spring/shock combinationon on the rear axle?
If this is possible, what are, or are there any possible problems of such a modification?

PS: the car is a 1989 245!

Thanks for any input!

Ciao -- have a nice day

M.P.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New lowering [200]
posted by  someone claiming to be M.P.  on Thu Feb 27 09:02 CST 2003 >
  • New lowering [200]
    posted by  ecarter  on Thu Feb 27 09:44 CST 2003 >
    • New lowering [200]
      posted by  someone claiming to be M.P.  on Thu Feb 27 21:22 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.