Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2006 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Brake Line Fitting Q 700

I am going to do a stainless line conversion for my car (an '88 740 GLE without ABS, girling calipers). I would like to get the fittings before I take the lines off the car, to minimise the "on jackstands" time :) Can anyone tell me what the fitting types are on the calipers and coming from the hard lines? I would much appreciate it! Thanks!

james peverill








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Brake Line Fitting Q 700

Why don't you just buy the lines which IPD or Eurosporttuning sells?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake Line Fitting Q 700

I've got a cheap source of the stainless lines... and have some laying around. Those ipd kits run pretty big dollars so I'm pretty sure I can do it for less. I also have a large box of old brake/flare fittings so I'm hoping I can find the right fittings without even buying any.

james







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.