Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2018 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

How do i remove the sensor from the radiator 700 1991

I'm about to replace the radiator andhoses on my 91 744t. I noticed there is a couple of wires/sensors going into my radiator and was curious whats the best way to remove it and reinstall it in the new radiator....and do i have to use anyting to seal it there? Do i need a new one? Any gaskets, etc?
Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

How do i remove the sensor from the radiator 700 1991

The sensor is for the fan. Remove the sensor by pulling it from the gasket. It uses no sealants.
To install, first seat gasket in hole, them push in sensor. It expands the gasket to a tight fit.
--
744-16v,745-16v,242Turbo.245DLT








  REPLY TO THIS MESSAGE    PRINT   SAVE 

How do i remove the sensor from the radiator 700 1991

Do i need a new gasket for the new radiator? or do i reuse the old one








  REPLY TO THIS MESSAGE    PRINT   SAVE 

How do i remove the sensor from the radiator 700 1991

You can probably use the old one, new radiators I've bought come with one.
--
744-16v,745-16v,242Turbo.245DLT







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.