Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

approach to starter 200

posted by  analyzer on  Thu Mar 27 06:21 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jan 1 17:41 CST 2014
[RELATED]

Hello all,

What's your approach to the starter's upper mounting bolt on the 240. In the past I wasted a huge amount of time with a hand ratchet with swivel and extensions. Has anyone used a power ratchet?

Tom








  REPLY TO THIS MESSAGE    PRINT   SAVE 

approach to starter 200

posted by  mcduck on  Thu Mar 27 07:49 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 9 11:47 CST 2012
[RELATED]

Sure.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

approach to starter 200

posted by  Cliff Pope on  Thu Mar 27 20:45 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Feb 3 05:28 CST 2011
[RELATED]

Ring spanner from above, put on backwards. Sacrifice a spanner and cut the other end off if you find you need the space. Apply extra leverage if necessary, or wack it with a hammer to start it. In my experience this is much easier than a socket with lots of extensions from below.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.