Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

b230 valve cover torque values 200

What is the correct torque value for the nuts that secure the valve cover?

TIA Steve








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

b230 valve cover torque values 200

I just snug them evenly by feel with a 1/4 inch drive ratchet.
--
Thanks to everyone for the help, Doug C. 81 242 Brick Off Blocks, stock, M46; 86 240, 130K








  REPLY TO THIS MESSAGE    PRINT   SAVE 

b230 valve cover torque values 200

12.5 Nm (9 ft-lb) from Bentley's
--
Bruce S. near D.C.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

b230 valve cover torque values 200

Same as Haynes (except they have it in inch pounds.)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

b230 valve cover torque values 200

Hey,

I've never used a torque wrench myself, but simply to make them tight is enough. Just don't crank them down so the gasket swells.

Happy Bricking,

Richard

87 245 DL 350,000 km
82 242 GLT 121,000 km

http://members.cardomain.com/richink







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.