Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2016 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

AMM test? 200 1989

posted by  greg_mustang on  Mon May 5 07:53 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 10 07:26 CST 2014
[RELATED]

How can I test an AMM that is off the car?
(Engine cuts out as soon asthrottle is pressed) - as per my previous post.

Thanks,
Greg Mustang
Ottawa-Montreal
Canada








  REPLY TO THIS MESSAGE    PRINT   SAVE 

AMM test? 200 1989

posted by  Fuel Pump on  Mon May 5 08:37 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 17 18:41 CST 2012
[RELATED]

Greg,

I belive that you have the LH 2.4. If so check the resistance between the number 2 and number 3 pin on the AMM. It should read between 2.5 and 4.0 ohms. If you have the LH 3.1 you will need to check the resistance between pins number 1 and 4 on the AMM. It should be 108 ohms.

Brian
--
86 240GL, 86 740GLE & others







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.