excellent, found them on sweedishtreasures.com for 38cents. Thinkd I'll order myself up a batch.
Thanks!
--
'70 145, Webber converson, pretty much stock other than that. & 89 740Turbo Sedan

When you replace the clips in the sheetmetal, unless it's a warm day, they can break pretty easily. A Volvo body man told me long ago that he'd dump them in his hot coffee before installing. I just used hot water, and the break rate dropped dramatically. It also helps if you make a little driver out of a piece of 1"x 1" pine, with the working end drilled 1/8" deep and slightly larger than the clip's pin. No more hammer misses cracking the clip or dinging the body.

1247708

online sources sell them as low as US$0.50. My local dealer charges $0.90.

Volvo should have them.They are the same as 240 clips through 1980.They can be purchased aftermarket also.Wurth (www.wurthusa.com) has them but you have to have an account,they tack on an $8.95 handling charge per order (fair,unless you just want some moulding clips!).I have a bag with a few hundread of them but I can't put my hands on them now.I know what you mean about mouldings falling off at embarrising times,I stopped on my way to the Davis meet in April to replace moulding clips and reinstall some mouldings at a gas station (waiting to meet other volvo folk)!I'll look around for the big bag of clips in the mean time.I havn't veiwed IPDs clip selection but is it possible you don't recognize it with center not depressed (flush)? It should be a wishbone shape in white with a pin sticking out that can be hammered flush.I found 2 new ones today.When the sun goes down and the coyotes howl I'll snap a picture!