Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Steve Ringlee 900

If no one has said thank you for a while, let me say it, Thank you. The 700/900 FAQ is an incredible resource for fixing these things. I recently undertook the job of replacing the ECC vacuum servo's under the dash. Yikes! Trying to get the last parts out and the first back in pretty well reduced my vocabulary to prayers to the Almighty asking for divine help. Along with the FAQ I also got some help from Phillip and Lou at Swedish Engineering. OK, I did use some duct tape but I rationalized that they were ducts and that made it OK. Putting the FAQ together must have been a massive job but continues to be a tremendous resource for those of us less mechanically minded. Thanks again for the effort.

Steve Branscom
Gig Harbor, WA
97 S90, 92 960 wgn 156K mi








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Steve Ringlee 900

FAQ is a collective production. Folks such as Dick Riess, Don Foster, John Sargent, Chris Herbst and many others have contributed most of the content. All I do is arrange it. Anyway, keep those contributions coming for the good of all.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Steve Ringlee 900

Well, Thanks to all involved. This site is a great resource.
Cheers!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.